Mechanic tools are used to fix, build, and take care of vehicles and machines. These tools help mechanics do their work safely and correctly, whether it’s tightening a bolt, checking an engine, or changing a tire. Knowing the names of these tools in English is very helpful for students, workers, and anyone interested in learning about machines. In this article, you will find a list of common mechanic tools with their names and clear pictures. This simple and useful guide will help you build your English vocabulary in a practical and easy way.
- Wrench
- Socket
- Ratchet
- Screwdriver
- Hammer
- Pliers
- Torque wrench
- Allen key
- Spanner
- Breaker bar
- Impact wrench
- Socket set
- Pry bar
- Multimeter
- Wire cutter
- Oil filter wrench
- Lug wrench
- Needle nose pliers
- Jack
- Jack stand
Mechanic Tools Names and Pictures
- Wrench
A tool used to turn bolts or nuts by gripping them tightly.
- Socket
A hollow tool that fits over a bolt or nut to turn it, usually used with a ratchet.
- Ratchet
A handle tool that allows sockets to turn bolts in one direction without removing the tool.
- Screwdriver
A tool used to drive or remove screws; it has a handle and a shaped tip.
- Hammer
A heavy tool used to hit, drive, or pull nails or to break things.
- Pliers
A hand tool used to hold, twist, or cut wires and other small parts.
- Torque Wrench
A special wrench that measures and applies a specific amount of force to bolts.
- Allen Key
A small L-shaped tool used to turn screws or bolts with a hexagonal hole.
- Spanner
Another word for wrench, used mainly in British English, often for gripping nuts and bolts.
- Breaker Bar
A long bar used with sockets to loosen very tight bolts by giving extra force.
- Impact Wrench
A power tool that uses bursts of force to quickly tighten or loosen bolts.
- Socket Set
A collection of different-sized sockets that fit various nuts and bolts, used with a ratchet.
- Pry Bar
A long metal bar used to lift, move, or pry things apart with leverage.
- Multimeter
An electronic tool that checks voltage, current, and resistance in electrical parts.
- Wire Cutter
A hand tool designed to cut electrical wires cleanly and safely.
- Oil Filter Wrench
A special tool used to remove or install oil filters during car servicing.
- Lug Wrench
A tool used to loosen or tighten the lug nuts on vehicle wheels.
- Needle Nose Pliers
Long, narrow-tipped pliers used for gripping small parts or reaching tight spaces.
- Jack
A lifting device used to raise a vehicle off the ground, usually for repairs.
- Jack Stand
A strong, stable support that holds up a vehicle safely after it’s been lifted with a jack.
Mechanic Tools Names and Pictures
Types of Mechanic Tools Names
- Creeper
- Funnel
- Circuit tester
- Work light
- Air compressor
- Shop vacuum
- Tire pressure gauge
- Mechanic gloves
- Battery tester
- Rivet gun
- Feeler gauge
- Caliper
- Scan tool
- Impact driver
- Punch
- Chisel
- Bench vise
- Drill
- Drill bits
- Heat gun
Mechanic Tools Names and their Pictures
- Creeper
A low, flat board with wheels that allows a mechanic to slide under a vehicle comfortably.
- Funnel
A cone-shaped tool used to pour fluids into small openings without spilling.
- Circuit Tester
A small device that checks if electricity is flowing through a wire or electrical part.
- Work Light
A bright portable light used to see clearly while working in dark or hidden areas.
- Air Compressor
A machine that pushes air into tools like tire inflators, spray guns, or impact tools.
- Shop Vacuum
A strong vacuum cleaner used to suck up dust, debris, or even water from workshop floors.
- Tire Pressure Gauge
A tool that shows how much air is inside a tire to help keep it properly inflated.
- Mechanic Gloves
Special gloves that protect hands from cuts, dirt, and heat while working on vehicles.
- Battery Tester
A device used to check if a car battery is charged and working correctly.
- Rivet Gun
A tool that fastens metal or plastic pieces together using rivets instead of screws.
- Feeler Gauge
A set of thin metal blades used to measure small gaps or spaces between parts.
- Caliper
A tool that accurately measures the thickness or inner and outer width of objects.
- Scan Tool
An electronic device that reads error codes from a vehicle’s computer to diagnose problems.
- Impact Driver
A tool that delivers strong twisting force to loosen tough screws or bolts.
- Punch
A metal tool used to mark a spot or to help remove pins from holes.
- Chisel
A sharp-edged tool used to cut or shape metal, especially during repair work.
- Bench Vise
A heavy tool mounted on a table to hold parts tightly in place while working.
- Drill
A power tool used to make holes in metal, plastic, or wood.
- Drill Bits
The cutting parts that attach to drills and come in different sizes for different hole types.
- Heat Gun
A tool that blows hot air to soften paint, heat shrink tubes, or loosen stuck parts.
Mechanic Tools Names and their Pictures
Different Types of Mechanic Tool Name
- Grease gun
- Service manual
- Timing light
- Spark plug socket
- Tap and die set
- Battery charger
- Vacuum pump
- Radiator pressure tester
- Compression tester
- Workbench
- Hose clamp pliers
- Engine hoist
- Gear puller
- Snap ring pliers
- Safety goggles
- Brake bleeder kit
- Mechanic stool
- Dent puller
- Pick set
- Inspection mirror
Common Mechanic Tool and their Pictures
- Grease Gun
A tool that pushes grease into mechanical parts to keep them moving smoothly.
- Service Manual
A detailed book that gives step-by-step repair and maintenance instructions for a vehicle.
- Timing Light
A special light used to check and adjust the timing of a car’s engine for proper performance.
- Spark Plug Socket
A deep socket made to fit and remove spark plugs without damaging them.
- Tap and Die Set
A tool set used to create or repair threads inside nuts (tap) and on bolts (die).
- Battery Charger
A device that adds electrical energy to a car battery when it’s low or dead.
- Vacuum Pump
A tool that removes air or fluid from systems like brakes or air conditioning.
- Radiator Pressure Tester
A tool used to check for leaks in a car’s radiator by applying pressure.
- Compression Tester
A tool that checks how much pressure an engine cylinder builds during operation.
- Workbench
A strong table where mechanical work is done; it often holds tools and parts.
- Hose Clamp Pliers
Special pliers made to squeeze and remove clamps that hold hoses in place.
- Engine Hoist
A heavy lifting tool used to safely raise or remove a car engine from the vehicle.
- Gear Puller
A tool used to remove gears, pulleys, or bearings without causing damage.
- Snap Ring Pliers
Pliers designed to install or remove snap rings, which hold parts onto shafts.
- Safety Goggles
Protective eyewear that shields eyes from dust, sparks, and harmful fluids.
- Brake Bleeder Kit
A tool set used to remove air bubbles from the brake system to improve brake response.
- Mechanic Stool
A rolling or adjustable-height seat that helps a mechanic work comfortably at low levels.
- Dent Puller
A tool that helps remove dents from car body panels without needing full replacements.
- Pick Set
A group of small tools with pointed tips used for lifting, poking, or removing tiny parts.
- Inspection Mirror
A small mirror on a stick that helps a mechanic see hidden or hard-to-reach areas.
Common Mechanic Tool and their Pictures
80 Mechanic Tools Names
- Magnet tool
- OBD2 scanner
- Hand file
- Wire brush
- Shop rag
- Seal puller
- Gasket scraper
- Hose cutter
- Measuring tape
- Flywheel puller
- Paint marker
- Flashlight
- Flare nut wrench
- Hose pliers
- Engine stand
- Dead blow hammer
- Angle grinder
- Bearing puller
- Camshaft locking tool
- Fuel pressure gauge
Mechanic Tools Names and Pictures
- Magnet Tool
A stick with a magnet at the end used to pick up dropped metal parts like screws or bolts.
- OBD2 Scanner
An electronic device that reads a car’s computer system to find engine or sensor problems.
- Hand File
A tool with a rough surface used to smooth or shape metal edges or surfaces.
- Wire Brush
A tool with metal bristles used to clean rust, dirt, or paint from parts.
- Shop Rag
A reusable cloth used by mechanics to wipe off oil, grease, or hands during repair work.
- Seal Puller
A tool designed to remove rubber or metal seals from engines or other parts without damage.
- Gasket Scraper
A flat tool used to clean off old gasket material from engine surfaces.
- Hose Cutter
A tool with sharp blades used to cut rubber or plastic hoses cleanly and evenly.
- Measuring Tape
A flexible ruler used to measure length or distance, useful for part fitting or layout.
- Flywheel Puller
A tool that removes the flywheel from the engine without damaging the crankshaft.
- Paint Marker
A marker that writes with paint instead of ink, used to mark parts or bolts clearly.
- Flashlight
A small, handheld light that helps mechanics see in dark or tight spaces.
- Flare Nut Wrench
A special wrench that grips more sides of a nut, often used on brake or fuel lines.
- Hose Pliers
Pliers designed to grip and remove hoses from fittings without cutting or damaging them.
- Engine Stand
A strong frame that holds an engine safely off the ground while it’s being repaired or rebuilt.
- Dead Blow Hammer
A soft-faced hammer that delivers force without bouncing, used for delicate or precise hits.
- Angle Grinder
A powerful tool with a rotating disc used to cut, grind, or polish metal and other materials.
- Bearing Puller
A tool used to remove bearings from shafts or housings without causing damage.
- Camshaft Locking Tool
A tool that holds the camshaft in place while adjusting timing or replacing the timing belt.
- Fuel Pressure Gauge
A tool that checks how much pressure is in the fuel system to ensure proper engine function.
Mechanic Tools Names and Pictures
Learn more helpful articles
Leave a Comment