Electrical tools are used to install, repair, and maintain electrical systems in homes, buildings, and machines. These tools are important for electricians and also useful for anyone who wants to do basic electrical work. Knowing the names of electrical tools in English can help you understand instructions, buy the right items, and talk clearly about your work. In this article, you will learn a helpful list of common electrical tools with their names and clear pictures. This guide is written in easy language and is perfect for students, workers, and beginners who want to improve their English vocabulary.
List of Electrical Tools Names in English
- Multimeter
- Wire stripper
- Voltage tester
- Circuit breaker
- Power drill
- Soldering iron
- Insulation tester
- Wire cutter
- Cable gland
- Clamp meter
- Cable crimper
- Continuity tester
- Heat gun
- Conduit bender
- Electrical tape
- Fish tape
- Pliers
- Nut driver
- Utility knife
- Tape measure
Electrical Tools Names in English and Pictures
- Multimeter
A tool used to measure voltage, current, and resistance in electrical circuits.
- Wire Stripper
A hand tool used to remove the plastic coating from electric wires without cutting the wire inside.
- Voltage Tester
A simple device used to check if electricity is flowing through a wire or socket.
- Circuit Breaker
A safety device that automatically cuts off power when there is too much current or a fault in the circuit.
- Power Drill
An electric tool used to make holes or tighten screws quickly, often used to mount electrical boxes.
- Soldering Iron
A heated tool used to join wires or components by melting a metal called solder.
- Insulation Tester
A device used to check if electrical insulation (wire covering) is safe and not leaking electricity.
- Wire Cutter
A small tool used to cut electric wires cleanly and easily.
- Cable Gland
A small fitting used to safely connect cables to electrical equipment and protect from dust or moisture.
- Clamp Meter
A tool that can measure the flow of electric current in a wire without touching or cutting it.
- Cable Crimper
A tool used to tightly attach connectors to the end of cables by pressing them together.
- Continuity Tester
A device used to check if electricity can flow freely through a wire or circuit.
- Heat Gun
A tool that blows hot air and is used to shrink insulation, loosen paint, or soften glue during electrical work.
- Conduit Bender
A tool used to bend metal or plastic pipes that protect electrical wires in buildings.
- Electrical Tape
A special tape used to cover and insulate wires, preventing short circuits and shocks.
- Fish Tape
A long, flat wire used to guide new wires through walls, ceilings, or electrical conduits.
- Pliers
A hand tool used to grip, twist, or pull wires during electrical work.
- Nut Driver
A screwdriver-like tool used to tighten nuts on terminals and small bolts inside electrical boxes.
- Utility Knife
A sharp, retractable knife used to cut wires, cables, or insulation cleanly.
- Tape Measure
A flexible ruler used to measure distances, usually needed when installing wires or panels accurately.
Electrical Tools Names in English and Pictures
Basic Electrical Tools Names
- Cable tester
- Circuit tracer
- Digital caliper
- Thermal scanner
- Ground tester
- Electric screwdriver
- Panel board
- Fuse puller
- Cable reel
- Power inverter
- Voltage detector
- Battery charger
- Cordless drill
- Wire tracker
- Punch down tool
- Terminal block
- Socket tester
- Light meter
- Extension cord
- Power strip
Electrical Tools Names and their Pictures
- Cable Tester
A tool used to check if wires inside a cable are properly connected and working.
- Circuit Tracer
A device used to find and follow hidden wires in walls without opening them.
- Digital Caliper
A precise measuring tool used to check small parts or gaps, useful in panel and component fitting.
- Thermal Scanner
A device that shows heat levels in electrical parts to spot overheating or faults.
- Ground Tester
A tool used to check if electrical systems are properly grounded for safety.
- Electric Screwdriver
A powered tool used to fasten or remove screws quickly, especially in electrical panels.
- Panel Board
A metal box that holds breakers and fuses, distributing electricity to different parts of a building.
- Fuse Puller
A small tool that safely removes fuses from panels without touching them by hand.
- Cable Reel
A round spool that holds long electrical cables, used for easy storage and transport.
- Power Inverter
A device that changes battery power (DC) into plug power (AC), often used in cars or backup systems.
- Voltage Detector
A pen-like tool that senses voltage in a wire or socket without touching the metal.
- Battery Charger
A device that refills power in batteries by connecting them to an electric source.
- Cordless Drill
A drill powered by battery, used to make holes or drive screws without needing a plug.
- Wire Tracker
A tool that helps find the other end of a wire in walls or bundles, useful in network or phone lines.
- Punch Down Tool
A hand tool used to connect wires into terminals or jacks by pushing them into slots.
- Terminal Block
A small connector where wires can be safely joined or separated inside panels or devices.
- Socket Tester
A plug-in tool that checks if a wall socket is wired correctly and safe to use.
- Light Meter
A device that measures how bright a light source is, used in lighting design and safety checks.
- Extension Cord
A long cable with plugs on both ends, used to bring power to devices far from a wall socket.
- Power Strip
A device with multiple sockets connected to one plug, allowing many devices to use one outlet.
Electrical Tools Name with their Pictures
Different Electrical Tool Name in English
- GFCI tester
- Amp meter
- Voltage regulator
- Surge protector
- Control panel
- Screwdriver set
- Angle grinder
- Hammer drill
- Electrical relay
- Box cutter
- Oscilloscope
- Conduit cutter
- Hole saw
- Electrical gloves
- Hex key set
- Torque wrench
- Electric saw
- Wiring harness
- Electrical level
- Electrical box
Electrical Tools Name with their Pictures
- GFCI Tester
A small tool used to check if a GFCI outlet (safety socket) is working correctly to prevent shocks. - Amp Meter
A device used to measure the amount of electric current flowing in a wire or circuit.
- Voltage Regulator
A tool that keeps the voltage stable in a system to protect electrical devices from damage.
- Surge Protector
A power strip that protects connected devices from sudden spikes in voltage.
- Control Panel
A central box that holds switches, meters, and controls to manage electrical machines or systems.
- Screwdriver Set
A group of screwdrivers with different sizes and tips, used for tightening or loosening screws.
- Angle Grinder
A powerful handheld tool used for cutting, grinding, or polishing metal surfaces.
- Hammer Drill
A drill that hits while spinning, useful for making holes in concrete or brick during electrical work.
- Electrical Relay
A small switch that turns on/off automatically using electric signals, common in control systems.
- Box Cutter
A sharp tool with a retractable blade used to cut boxes, cables, and plastic covers.
- Oscilloscope
A device that shows how electricity changes over time in a wave format, used by advanced electricians.
- Conduit Cutter
A tool designed to neatly cut metal or plastic pipes that carry electrical wires.
- Hole Saw
A circular cutting tool used to make round holes in walls, panels, or metal sheets for cable entry.
- Electrical Gloves
Safety gloves made from rubber or special material to protect from electric shocks.
- Hex Key Set
A group of L-shaped tools (also called Allen keys) used to tighten bolts with hexagonal holes.
- Torque Wrench
A tool that applies a set amount of force to bolts, important in electrical panel connections.
- Electric Saw
A motorized tool used for cutting wood, plastic, or even metal during installations.
- Wiring Harness
A group of wires bundled together to connect different parts of a machine or system neatly.
- Electrical Level
A tool used to make sure electrical boxes or conduits are installed straight and balanced.
- Electrical Box
A protective container fixed in walls or ceilings to hold wires, switches, or outlets.
Electrical Tools Names and their Pictures
80 Electrical Tool Name
- Electric fuse
- Transformer
- Wire label printer
- Rotary hammer
- Cable tie gun
- Voltage selector switch
- Ohmmeter
- Diode
- Crimping pliers
- Power supply unit
- Battery tester pen
- Hand auger
- Panel heater
- Electric switchgear
- Voltage attentuator
- Wire ferrules
- Electrical terminal
- Test bench
- Wire brush
- Hole punch
Electrical Tools Names with their Pictures
- Electric Fuse
A safety device that breaks the circuit if too much current flows, preventing damage or fire.
- Transformer
A device used to change the voltage level in a power line — either increase or decrease it.
- Wire Label Printer
A small printer used to create labels for wires, helping to identify them easily during installation or repair.
- Rotary Hammer
A heavy-duty drill that uses spinning and pounding action, great for drilling into concrete or brick.
- Cable Tie Gun
A hand tool used to tighten and cut cable ties neatly and securely during wiring jobs.
- Voltage Selector Switch
A switch that allows a device to operate on different voltage levels, often found in multi-country equipment.
- Ohmmeter
A tool that measures electrical resistance in a wire or component to check if it allows current to pass.
- Diode
A small electrical part that allows current to flow in only one direction, used to protect circuits.
- Crimping Pliers
Special pliers used to press connectors tightly onto wire ends, creating a solid electrical link.
- Power Supply Unit (PSU)
A box-like device that provides power to machines or systems by converting energy into the needed form.
- Battery Tester Pen
A pen-shaped tool used to check if a battery has enough power or needs replacement.
- Hand Auger
A manual drilling tool used to make small holes in walls or panels for wire routing.
- Panel Heater
A flat heating unit placed inside control panels to keep the internal temperature stable and moisture-free.
- Electric Switchgear
A system of switches, fuses, and breakers used to control and protect electric circuits.
- Voltage Attenuator
A device that reduces voltage levels in a signal to prevent overload or damage to sensitive tools.
- Wire Ferrules
Small metal tubes crimped onto the ends of stranded wires to keep them neat and strong during connection.
- Electrical Terminal
A contact point where wires are connected to a circuit, used in devices, panels, and switchboards.
- Test Bench
A setup with equipment used to check or repair electrical components in a safe and controlled space.
- Wire Brush
A tool with metal bristles used to clean electrical contacts or remove rust from metal surfaces.
- Hole Punch
A tool that makes clean, round holes in electrical boxes, panels, or metal sheets for cables or fittings.
Electrical Tools Names with their Pictures
Learn more helpful articles
Leave a Comment