Hardware Tools Names in English with Their Pictures

Hardware tools are the basic instruments we use to build, fix, or make things at home, in schools, or on job sites. These tools help us with many tasks like hammering nails, tightening screws, cutting wood, or measuring objects. Knowing the names of these tools in English is very useful, especially for students, workers, and anyone who wants to learn practical English. In this article, you will learn hardware tools with their names in English and pictures to help you recognize each one easily and understand how they are used. It also helps in buying the right tool for the right job.

Hardware Tools Names in English

• Hammer
• Screwdriver
• Wrench (Spanner)
• Pliers
• Drill machine
• Saw
• Tape measure
• Level (Spirit level)
• Chisel
• Allen key (Hex key)
• Mallet
• Utility knife (Cutter)
• Handsaw
• Hacksaw
• Adjustable wrench
• Pipe wrench
• Torque wrench
• Claw hammer
• Sledgehammer
• Crowbar
• Pry bar
• Boltcutter
• Vise
• C-clamp
• G-clamp

60 Hardware Tools Names with their Pictures

• Hammer
  A tool used to hit nails into wood or other surfaces.
  
• Screwdriver
  A tool used to turn screws in or out of materials.
  
• Wrench (Spanner)
  A tool used to grip and turn nuts and bolts.
  
• Pliers
  A tool used for holding, bending, or cutting wires.
  
• Drill machine
  A power tool used to make holes in walls, wood, or metal.
  
• Saw
  A tool with sharp teeth used to cut wood or metal.
  
• Tape measure
  A flexible ruler used to measure length or distance.
  
• Level (Spirit level)
   A tool used to check if a surface is straight or flat.
  
• Chisel
  A sharp tool used to carve or cut hard materials like wood or stone.
  
• Allen key (Hex key)
  A small tool used to turn hex screws.
  
• Mallet
  A type of soft hammer used for gentle tapping without damage.
  
• Utility knife (Cutter)
  A small, sharp knife used for cutting things like cardboard or plastic.
  
• Handsaw
   A manual saw used for cutting wood by hand.
  
• Hacksaw
  A fine-toothed saw used for cutting metal or plastic.
  
• Adjustable wrench
  A wrench with a movable jaw for different sizes of nuts.
  
• Pipe wrench
   A strong wrench used for gripping and turning pipes.
  
• Torque wrenchA 
  wrench is used to apply a specific amount of force to bolts.
  
• Claw hammer
  A hammer with one side for hitting and the other side for pulling nails.
  
• Sledgehammer
  A heavy hammer used for breaking stones or concrete.
  
• Crowbar
  A strong metal bar used to lift or break objects.
  
• Pry bar
  A flat tool used to remove nails or open tight spaces.
  
• Boltcutter
  A heavy tool used to cut chains, bolts, or wires.
  
• Vise
  A device used to hold materials firmly in place while working.
  
• C-clamp
  A C-shaped clamp used to hold things together tightly.
  
• G-clamp
  Another type of clamp shaped like a ‘G’ used to secure objects.
  

Tools Name in English

• Measuring tape
• Square tool (Try square)
• Trowel
• Caulking gun
• Wire stripper
• Soldering iron
• Heat gun
• Staple gun
• Air compressor
• Jack (Car jack or hydraulic jack)
• Angle grinder
• Bench grinder
• Multimeter
• Voltage tester
• Nail gun
• Rivet gun
• Pipe cutter
• Files (Metal files)
• Sandpaper
• Tool box
• Workbench
• Socket set
• Nut driver
• Hole saw
• Plumb bob

Common hardware Tools Names and pictures

• Square tool (Try square)
  A tool used to mark or check right angles in carpentry.
  
• Trowel
  A small hand tool used in masonry to apply or spread cement or plaster.
  
• Caulking gun
   A tool used to seal gaps using a tube of caulk.
  
• Wire stripper
  A tool used to remove the outer coating of wires.
  
• Soldering iron
  A tool used to melt solder to join wires or metal parts.
  
• Heat gun
  A tool that blows hot air to remove paint or bend plastic.
  
• Staple gun
  A tool used to drive staples into materials like wood or fabric.
  
• Air compressor
  A machine that pushes air into tools or tires.
  
• Jack (Car jack)
  A tool used to lift heavy vehicles for repair.
  
• Angle grinder
  A power tool used to cut or polish metal and stone.
  
• Bench grinder
  A tool with two rotating wheels used for sharpening tools.
  
• Multimeter
  A device used to measure electricity like voltage and current.
  
• Voltage tester
  A small device that checks if electricity is flowing.
  
• Nail gun
  A power tool that quickly drives nails into wood or walls.
  
• Rivet gun
  A tool used to fasten materials together using rivets.
  
• Pipe cutter
  A tool used to neatly cut through pipes.
  
• Files (Metal files)
  Tools with rough surfaces used to smooth or shape materials.
  
• Sandpaper
  A rough paper used to smooth surfaces by rubbing.
  
• Tool box
  A container used to store all tools safely.
  
• Workbench
  A sturdy table where work like cutting or drilling is done.
  
• Socket set
  A set of tools used to tighten or loosen nuts and bolts.
  
• Nut driver
  A tool like a screwdriver used for turning nuts.
  
• Hole saw
  A tool used to drill large round holes in wood or metal.
  
• Plumb bob
  A weight on a string used to check vertical alignment.
  
• Measuring tape
  A tool used to measure size, length, or distance.
  

---

More helpful articles

• Car Tools Names in English
• Names of Pet animals in English
• Measuring Tools Names in English
• Measuring Tools Names in English