Mechanic Tools Names in English with their Pictures

• Wrench
• Socket
• Ratchet
• Screwdriver
• Hammer
• Pliers
• Torque wrench
• Allen key
• Spanner
• Breaker bar
• Impact wrench
• Socket set
• Pry bar
• Multimeter
• Wire cutter
• Oil filter wrench
• Lug wrench
• Needle nose pliers
• Jack
• Jack stand

Mechanic Tools Names and Pictures

• Wrench
  A tool used to turn bolts or nuts by gripping them tightly.
  
• Socket
  A hollow tool that fits over a bolt or nut to turn it, usually used with a ratchet.
  
• Ratchet
  A handle tool that allows sockets to turn bolts in one direction without removing the tool.
  
• Screwdriver
  A tool used to drive or remove screws; it has a handle and a shaped tip.
  
• Hammer
  A heavy tool used to hit, drive, or pull nails or to break things.
  
• Pliers
  A hand tool used to hold, twist, or cut wires and other small parts.
  
• Torque Wrench
  A special wrench that measures and applies a specific amount of force to bolts.
  
• Allen Key
  A small L-shaped tool used to turn screws or bolts with a hexagonal hole.
  
• Spanner
  Another word for wrench, used mainly in British English, often for gripping nuts and bolts.
  
• Breaker Bar
  A long bar used with sockets to loosen very tight bolts by giving extra force.
  
• Impact Wrench
  A power tool that uses bursts of force to quickly tighten or loosen bolts.
  
• Socket Set
  A collection of different-sized sockets that fit various nuts and bolts, used with a ratchet.
  
• Pry Bar
  A long metal bar used to lift, move, or pry things apart with leverage.
  
• Multimeter
  An electronic tool that checks voltage, current, and resistance in electrical parts.
  
• Wire Cutter
  A hand tool designed to cut electrical wires cleanly and safely.
  
• Oil Filter Wrench
  A special tool used to remove or install oil filters during car servicing.
  
• Lug Wrench
  A tool used to loosen or tighten the lug nuts on vehicle wheels.
  
• Needle Nose Pliers
  Long, narrow-tipped pliers used for gripping small parts or reaching tight spaces.
  
• Jack
  A lifting device used to raise a vehicle off the ground, usually for repairs.
  
• Jack Stand
  A strong, stable support that holds up a vehicle safely after it’s been lifted with a jack.
  

Types of Mechanic Tools Names

• Creeper
• Funnel
• Circuit tester
• Work light
• Air compressor
• Shop vacuum
• Tire pressure gauge
• Mechanic gloves
• Battery tester
• Rivet gun
• Feeler gauge
• Caliper
• Scan tool
• Impact driver
• Punch
• Chisel
• Bench vise
• Drill
• Drill bits
• Heat gun

Mechanic Tools Names and their Pictures

• Creeper
  A low, flat board with wheels that allows a mechanic to slide under a vehicle comfortably.
  
• Funnel
  A cone-shaped tool used to pour fluids into small openings without spilling.
  
• Circuit Tester
  A small device that checks if electricity is flowing through a wire or electrical part.
  
• Work Light
  A bright portable light used to see clearly while working in dark or hidden areas.
  
• Air Compressor
  A machine that pushes air into tools like tire inflators, spray guns, or impact tools.
  
• Shop Vacuum
  A strong vacuum cleaner used to suck up dust, debris, or even water from workshop floors.
  
• Tire Pressure Gauge
  A tool that shows how much air is inside a tire to help keep it properly inflated.
  
• Mechanic Gloves
  Special gloves that protect hands from cuts, dirt, and heat while working on vehicles.
  
• Battery Tester
  A device used to check if a car battery is charged and working correctly.
  
• Rivet Gun
  A tool that fastens metal or plastic pieces together using rivets instead of screws.
  
• Feeler Gauge
  A set of thin metal blades used to measure small gaps or spaces between parts.
  
• Caliper
  A tool that accurately measures the thickness or inner and outer width of objects.
  
• Scan Tool
  An electronic device that reads error codes from a vehicle’s computer to diagnose problems.
  
• Impact Driver
  A tool that delivers strong twisting force to loosen tough screws or bolts.
  
• Punch
  A metal tool used to mark a spot or to help remove pins from holes.
  
• Chisel
  A sharp-edged tool used to cut or shape metal, especially during repair work.
  
• Bench Vise
  A heavy tool mounted on a table to hold parts tightly in place while working.
  
• Drill
  A power tool used to make holes in metal, plastic, or wood.
  
• Drill Bits
  The cutting parts that attach to drills and come in different sizes for different hole types.
  
• Heat Gun
  A tool that blows hot air to soften paint, heat shrink tubes, or loosen stuck parts.
  

Different Types of Mechanic Tool Name

• Grease gun
• Service manual
• Timing light
• Spark plug socket
• Tap and die set
• Battery charger
• Vacuum pump
• Radiator pressure tester
• Compression tester
• Workbench
• Hose clamp pliers
• Engine hoist
• Gear puller
• Snap ring pliers
• Safety goggles
• Brake bleeder kit
• Mechanic stool
• Dent puller
• Pick set
• Inspection mirror

Common Mechanic Tool and their Pictures

• Grease Gun
  A tool that pushes grease into mechanical parts to keep them moving smoothly.
  
• Service Manual
  A detailed book that gives step-by-step repair and maintenance instructions for a vehicle.
  
• Timing Light
  A special light used to check and adjust the timing of a car’s engine for proper performance.
  
• Spark Plug Socket
  A deep socket made to fit and remove spark plugs without damaging them.
  
• Tap and Die Set
  A tool set used to create or repair threads inside nuts (tap) and on bolts (die).
  
• Battery Charger
  A device that adds electrical energy to a car battery when it’s low or dead.
  
• Vacuum Pump
  A tool that removes air or fluid from systems like brakes or air conditioning.
  
• Radiator Pressure Tester
  A tool used to check for leaks in a car’s radiator by applying pressure.
  
• Compression Tester
  A tool that checks how much pressure an engine cylinder builds during operation.
  
• Workbench
  A strong table where mechanical work is done; it often holds tools and parts.
  
• Hose Clamp Pliers
  Special pliers made to squeeze and remove clamps that hold hoses in place.
  
• Engine Hoist
  A heavy lifting tool used to safely raise or remove a car engine from the vehicle.
  
• Gear Puller
  A tool used to remove gears, pulleys, or bearings without causing damage.
  
• Snap Ring Pliers
  Pliers designed to install or remove snap rings, which hold parts onto shafts.
  
• Safety Goggles
  Protective eyewear that shields eyes from dust, sparks, and harmful fluids.
  
• Brake Bleeder Kit
  A tool set used to remove air bubbles from the brake system to improve brake response.
  
• Mechanic Stool
  A rolling or adjustable-height seat that helps a mechanic work comfortably at low levels.
  
• Dent Puller
  A tool that helps remove dents from car body panels without needing full replacements.
  
• Pick Set
  A group of small tools with pointed tips used for lifting, poking, or removing tiny parts.
  
• Inspection Mirror
  A small mirror on a stick that helps a mechanic see hidden or hard-to-reach areas.
  

80 Mechanic Tools Names

• Magnet tool
• OBD2 scanner
• Hand file
• Wire brush
• Shop rag
• Seal puller
• Gasket scraper
• Hose cutter
• Measuring tape
• Flywheel puller
• Paint marker
• Flashlight
• Flare nut wrench
• Hose pliers
• Engine stand
• Dead blow hammer
• Angle grinder
• Bearing puller
• Camshaft locking tool
• Fuel pressure gauge

Mechanic Tools Names and Pictures

• Magnet Tool
  A stick with a magnet at the end used to pick up dropped metal parts like screws or bolts.
  
• OBD2 Scanner
  An electronic device that reads a car’s computer system to find engine or sensor problems.
  
• Hand File
  A tool with a rough surface used to smooth or shape metal edges or surfaces.
  
• Wire Brush
  A tool with metal bristles used to clean rust, dirt, or paint from parts.
  
• Shop Rag
  A reusable cloth used by mechanics to wipe off oil, grease, or hands during repair work.
  
• Seal Puller
  A tool designed to remove rubber or metal seals from engines or other parts without damage.
  
• Gasket Scraper
  A flat tool used to clean off old gasket material from engine surfaces.
  
• Hose Cutter
  A tool with sharp blades used to cut rubber or plastic hoses cleanly and evenly.
  
• Measuring Tape
  A flexible ruler used to measure length or distance, useful for part fitting or layout.
  
• Flywheel Puller
  A tool that removes the flywheel from the engine without damaging the crankshaft.
  
• Paint Marker
  A marker that writes with paint instead of ink, used to mark parts or bolts clearly.
  
• Flashlight
  A small, handheld light that helps mechanics see in dark or tight spaces.
  
• Flare Nut Wrench
  A special wrench that grips more sides of a nut, often used on brake or fuel lines.
  
• Hose Pliers
  Pliers designed to grip and remove hoses from fittings without cutting or damaging them.
  
• Engine Stand
  A strong frame that holds an engine safely off the ground while it’s being repaired or rebuilt.
  
• Dead Blow Hammer
  A soft-faced hammer that delivers force without bouncing, used for delicate or precise hits.
  
• Angle Grinder
  A powerful tool with a rotating disc used to cut, grind, or polish metal and other materials.
  
• Bearing Puller
  A tool used to remove bearings from shafts or housings without causing damage.
  
• Camshaft Locking Tool
  A tool that holds the camshaft in place while adjusting timing or replacing the timing belt.
  
• Fuel Pressure Gauge
  A tool that checks how much pressure is in the fuel system to ensure proper engine function.
  

Learn more helpful articles

• Reptiles Names in English
• Water Animals Names in English
• House Tools Names in English 
• 1000 Basic English Sentences for Kids